Huixian Xinda Textile Machinery Parts Co., Ltd. provides Wood Shuttle Compressed Blank 730X78X70, a small amount of 730X78X70mm three-layer and four layer compressed wood for wooden shuttle blanks. Rectangular compressed wood is used as the wooden shuttle blank, which has advantages such as high specific gravity, low deformation, and good wear resistance. Generally, it is mainly made of three layers, that is, three pieces of wood are brushed, stacked, and pressed under high temperature environment. The material for compressed wood is generally birch, with some using poplar or other harder wood materials. The compression ratio is approximately 1:1.15.

The above picture shows a wooden shuttle blank made of three layers of material, with a height of 70mm. The black pattern is located on the brush layer.

The above picture shows the width of the wooden shuttle blank, usually used as the upper or lower surface of the shuttle.

The above picture is a cross-section of compressed wood, with three layers of compression on the left and four layers of compression on the right. The inventory of textile wood shuttle materials, shuttle blanks, compressed wood, and textile wood accessories has been decreasing year by year, with no new sources of supply to supplement.

If you need to purchase wooden shuttle blanks 730X78X70mm three layer, four layer compressed wood, or other length specifications of compressed wood, please contact Mr. Yang from our company for consultation.

• UP：Heavy Duty Blanket Loom Wooden Shuttle
• NEXT：Q7 Shuttle Box Lifting Backboard Tongue